Replace a DECT Cordless Phone

When a cordless phone is replaced, the new one needs to be subscribed against the system. To do this:

Log into the OpenMobility Manager (hosted through the 'primary' DECT access point):
- Ensure you have an IP address in the 172.30.255.x range
- Turn off proxy settings
1) Navigate to http://172.30.255.48
2) Login using the details stored on SharePoint
3) Navigate to Portable Parts
4) Click Start (under Conventional Installation) - Subscription Allowed should now have a tick beside it
5) Delete the old phone by clicking on the bin icon beside it in the device listing
6) Click New
7) Enter a name, the number and the IPEI:
a) On the phone, navigate to Menu | System and press OK
b) Navigate to IPEI and press OK
8) Make a note of the authorization code and click OK
9) Make a note of the PARK (shown on the right-hand of the window)
10) Start the Mitel Admin Console and open the Wireless Phones IP Set Configuration form
11) Find the extension number for the new phone, select it and click Change
12) Copy and paste the MAC Address from the OMM console into the relevant field
13) Click Save followed by OK and exit the Mitel Admin Console
14) Subscribe the phone:
a) On the phone, navigate to Menu | System and press OK
b) Navigate to Subscription and press OK
c) Press New and dial in the PARK (include the asterisk)
d) Press Go On
e) Dial in the authorization code and press OK
15) On the OMM console click Stop - Subscription Allowed should now have a cross beside it
16) Click Exit